Pella Car Care

Modern cars and trucks run on 12 volt electrical systems. 12 volts is enough to get the job done without having so much power that there is danger of electrocution. But today’s vehicles have more electrical components and do-dads than ever before. This really strains your electrical system, making it hard for the battery to keep up. Think about it: electric seats, seat heaters, power locks, windows and sun roofs. And then we have all the power outlets for our cell phones, computers, and DVD players. We also have navigation systems and powerful stereos. Plus there are all the engine and transmission computers, traction control, stability control, anti-lock brakes, sensors and on and on. Even the security system is running off the battery while the car is turned off.

Fortunately, battery technology has given us resilient batteries that are able to meet these strenuous requirements. But the fact is, batteries just wear out over time. Eventually, every battery gets to the point where it cannot hold enough of a charge to start your car. Sometimes batteries need to be replaced because they have just worn out. Or, in other cases, they have developed a leak and need to be replaced.

Special safety precautions are taken when working with batteries in the shop. These precautions also apply to anyone who is poking around the battery. Batteries contain sulfuric acid that can damage your eyes and burn your skin, so safety glasses and rubber gloves are a must. Be careful to not spill acid on your clothes or the vehicle’s paint. Of course, avoid short circuiting the battery as well.

Replacement batteries come in all shapes and sizes. Some cars have limited space that requires a specially shaped battery to fit. Larger engines require more powerful batteries to get them started. If you live in a cold climate you will need a more powerful battery because engines are harder to start when it is cold.

Sometimes there is quite a price range for batteries that will work in a particular car. Think of it as “good”, “better” and “best”. More expensive batteries have a longer warranty and are guaranteed to last longer. As with most things, paying a little more up front saves money in the long run.

For more information about batteries, call Pella Car Care at 641-628-9223 or stop by at 90 Truman Road in Pella.

Ever heard the sad tale of a staggering repair bill from a broken timing belt? Bad news. Let’s take a lesson from their woes and remember to think about our timing belt.

First, let’s review what a timing belt does. The top part of the engine, over the cylinders is called the cylinder head. The head contains the valves. There’s at least one valve that lets the fresh air into the cylinder. This air, mixed with fuel, burns to create power. Then another valve or two open to allow the exhaust out of the engine. Each cylinder has 2 to 4 valves – that’s 12 to 24 valves for a V-6, up to 32 values on a V-8. The opening and closing of the valves is done by a camshaft. The timing belt uses the rotation of the engine to drive the camshaft which opens and close the valves. It’s called a timing belt because it has to be adjusted to rotate the camshaft to keep proper time with the engine so that everything’s in sync.

The timing belt is a toothed rubber belt . But some cars use a timing chain or timing gears instead of a belt. Timing chains and gears are much more durable, but manufacturers are using belts more because they are quieter – and cheaper. If you have a small or mid-sized passenger car, crossover or mini-van, chances are you have a timing belt.

Unfortunately, timing belts fail without any warning. That shuts you down right away. A technician can inspect your timing belt and look for cracks and looseness. But getting to the belt to take a look can be almost as much work as changing it on some cars. That’s why manufacturers recommend replacing the belt from time to time. For most vehicles it’s from 60,000 to 90,000 miles.  If your owners’ manual doesn’t specify an interval ask your service advisor.

One AutoNetTV producer has had two timing belts fail. The first was while he was waiting at a stop light – that repair cost several thousand dollars. The second was while driving on the highway – that one cost more than twice as much. Both had the cars out in the shop for three weeks. His cars had what we call “interference engines”, meaning that the valves and pistons are very close to each other. If the timing belt slips even one notch, the pistons will slam into the open valves. That’s why our friend’s highway failure was so much more expensive – his engine was traveling so fast that the valves were smashed and they chewed up the cylinder head.

A non-interference engine will just shut down if the timing belt breaks. You’re stranded, but the engine doesn’t suffer permanent damage. In both cases, our hapless friend was just a couple oil changes past the recommended interval for changing the timing belt. This is one of those things that you just cannot put off. Now replacing a timing belt is not cheap – but repairs for a broken belt can be many times as much.

Check your owners’ manual right away – especially if you have more than a 60,000 miles. You may need to get that belt replaced right away. And on many cars, the timing belt drives the water pump. So, it may be a good idea to replace the water pump while you’re at it because 90% of the work required for the new pump is already done with the belt change. Doing both at the same time saves you a lot of money because as they say, “timing’s everything”.

Iowa new car dealerships are happy to leave you with the impression that you should have all of your scheduled automotive maintenance performed at the dealership during the warranty period. Some go so far as to imply that your warranty protection depends on it. In fact, nothing is further from the truth. Federal laws in both the United States and Canada specify that you do not have to have your vehicle serviced at a dealership to maintain warranty protection. The laws further state that a vehicle manufacturer cannot mandate that you use their particular brand of replacement parts or fluids. This certainly means you have many more service options, but what about quality?

First off, it is important to know that vehicle manufacturers do not make all of their own parts. They look to thousands of independent suppliers to manufacture the parts that go into your car or truck. Many of these same manufacturers that make the parts that are original equipment for a new vehicle, also supply parts for the automotive aftermarket. That means that your local service center such as Pella Car Care has access to quality parts that meet or exceed auto makers’ specifications. Your service consultant can offer a range of parts solutions that give you the option to save some money or to upgrade to a higher performance part.

While TV commercials for auto dealerships will tout “genuine” parts, your Pella service center has the option to not only use that same part, but to help you choose one that better meets your driving needs. Dealership ads often promote the notion that only their technicians are up to the task of servicing their particular make of vehicle. That may be true if you drive a Ferrari, but for the rest of us, the training that your local service technicians receive is transferable to any vehicle.

Today’s service databases enable your service provider to get the right parts and to follow the right procedures to take care of your car. The diagnostic technology and equipment your service center uses enables them to get you back on the road as economically as possible. Speaking of economics, aftermarket labor rates are often lower than dealership rates.

So there you have it. Your local area service centers are more convenient than auto dealerships, are more economical and provide high quality parts and products. And, your warranty is protected unless the manufacturer can demonstrate that a particular part lead to a warranty failure. In addition, you have more options as to where you have your vehicle serviced or repaired and you can take advantage of innovations and improvements that aren’t available at the dealership.

The energy from exploding fuel is what powers your engine. But some of the vapors from the explosions escape into the lower part of the engine, called the crankcase. The crankcase is where your engine oil hangs out. These gases are about 70% unburned fuel. If the gases were allowed to stay in the crankcase, they would quickly contaminate the oil and turn it to sludge. Sludge is one of the biggest enemies of your engine, clogging it up, eventually leading to expensive failures. Also, the pressure build up would cause seals and gaskets to blow out. Therefore, these gases need to be vented out.

Gasoline engines used to simply have a hose that let the poisonous fumes vent out into the air. In 1963, the federal government required gas engines to have a special one-way valve installed to help reduce dangerous emissions. Diesel engines are not required to have these valves.

The positive crankcase ventilation, or PCV, valve routes crankcase gases through a hose and back into the air intake system where they are re-burned in the engine. Fresh, clean air is brought into the crankcase through a breather tube. It’s really a pretty simple system, but does an important job. The re-circulating air removes moisture and combustion waste from the crankcase, preventing sludge. This extends not only the life of your oil, but the engine as well. The PCV relieves pressure in the crankcase, preventing oil leaks.

Eventually, the PCV valve can get gummed up. Then it can not move enough air through the engine to keep it working efficiently. If the PCV valve is sticking enough, you could have oil leaks, excess oil consumption and a fouled intake system. If you experience hesitation or surging or an oil leak, it may be a sign of PCV value problems. Your owners’ manual may give a recommendation for when the PCV valve should be replaced – usually between 20,000 mi/32,000 km and 50,000 mi/80,000 km. Unfortunately, some manufacturers don’t list a recommendation in the manual, so it can be easy to overlook.

Many PCV system problems can be diagnosed with a visual inspection. Fortunately, PCV valve replacement is both quick and inexpensive. Proper oil changes will greatly extend the life of the PCV valve. Skipping a few recommended oil changes can allow varnish and gum to build up in the valve, reducing its efficiency. So now when your service technician tells you its time to replace your PCV valve, you will know what he’s talking about. If you have had your car for a while and this is the first you’ve ever heard of a PCV value, ask your tech to check yours out or call Pella Car Care at 641-628-9223.