Archive for June, 2010

Keeping Your Car Young in Pella

Wednesday, June 30th, 2010

We live in such a disposable society here in Pella. It’s amazing all the stuff we throw away.

New stuff comes out so fast, we just toss the old and move on. It seems like when we were kids, our parents were real sticklers about taking care of our stuff. You know, hang up your clothes, polish your shoes, put away your toys. If something got lost or ruined by neglect, tough – we had to do without.

We couldn’t afford new cars very often, so we tried to make them last as long as we could. It’s a good thing that cars are more reliable these days.

They just don’t break down as often. And the good news for us penny pinchers is that a modern car can easily go 200,000 miles with proper care. The engineering’s there and so is the manufacturing quality. The missing ingredient is us making sure we follow the manufacturer’s recommended maintenance schedules.

Is it really that bad to get off schedule? Well, it all adds up. Every time you go a couple thousand extra miles between oil changes, you’ve created an opportunity for sludge to form and clog passages. Then some parts don’t get oiled and they start to wear out faster.

Skip a cooling system service, and the corrosion inhibitors become depleted, and the radiator starts being damaged – one step closer to a failure. The same thing is true for transmission service, power brakes, fuel system cleaning – really everything on your schedule.

It’s also even more important for older vehicles. Those engines and other systems have had more time to get dirty, so they’re a bit more stressed anyway. But it’s never too late to get back on track with your maintenance and to hold off further damage.

It’s just another example of our parents being right. (Surprising how often that happens.) And it really does start with the oil change, just like Dad said. When you get a full service oil change they top off all your fluids and check for other items that are on your maintenance schedule. That’s like your safety net – go in for oil changes on time, and let your service advisor at Pella Car Care help you keep track of the rest.

Of course, some things are going to wear out along the way, stuff like alternators, water pumps and such. But that stuff is cheaper than a new car payment. And taking care of problems early means they have less time to cause other problems. It’s like having high cholesterol – you don’t want to wait for a heart attack before you address it.

Share

Posted in Maintenance | No Comments »

How Your Check Engine Light Works

Wednesday, June 23rd, 2010

Have you ever had an experience like this? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your check engine light started flashing!

You fear the worst, but within a block or two, the light stopped flashing, but stayed on. By the next day, the light was off.

You wonder; “What was going on?” Well, it’s actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn’t be that much air when the engine is just idling. Something’s wrong. Whatever’s wrong could cause some serious engine damage.

Warning, warning! It flashes the check engine light, to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I’m still concerned, I’ll keep this light on for now.

Then the Check Engine Light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it’s gone now. The danger is past, I’ll turn that light off.

Now a flashing check engine light is serious. You need to get it into our shop as soon as possible. But if it stops flashing, you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air to fuel mix, spark advance, and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the check engine warning.

The computer will then try to make adjustments if it can. If the computer can’t compensate for the problem, the check engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what’s wrong?

Actually, the code will tell the technician what sensor reading is out of parameters. It can’t really tell you why, because there could be any number of causes.

Let’s say you’re feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees.

You know your symptom – a fever – but you don’t know what’s causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory, and some in permanent memory. Each manufacturer’s computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy or that the auto parts store uses, doesn’t have the ability to retrieve long-term storage or manufacturer specific codes. Your Pella service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you’ve got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor, which is not cheap, and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at Pella Car Care. Give us a call at 641-628-9223 and let us help you resolve your check engine light issue.

Share

Posted in Dashboard | No Comments »

Diesel Maintenance For Iowa

Wednesday, June 16th, 2010

At Pella Car Care we hear from a lot of people who are excited about the new diesel engines that will soon be available in passenger cars and SUV’s. But our friends are often curious about the preventive maintenance requirements. People may not know that diesel engines have long been used extensively in Europe and Asia. In fact, in some markets, there’re nearly as many diesel powered passenger cars as there are gasoline.

Here’s who’s announced or is expected to announce new diesels for North America: BMW, Mercedes, Audi, Volkswagen, Nissan, Honda, Toyota, Hyundai and Subaru. Of course, the US auto makers will be expanding their diesel offerings as well. Diesels will become a very big deal here in Iowa.

You may ask, why has it taken so long getting to Iowa and North America? There are a bunch of reasons like fuel tax policies and such, but the biggest hurdle was that Iowa diesel fuel had a high sulfur content – too high for the latest generation of highly refined diesel engines. Recent government mandates to remove sulfur now opens up Iowa to the engines the rest of the world’s been enjoying for a long time.

Why are diesels so popular worldwide? Well, for starters, diesels get up to 30% better fuel economy than gas engines. And they last a lot longer. And modern diesel engines are refined, quiet and powerful – and there’s none of that black smoke we used to see.

Some people may think that diesels create more pollution. But, you need to rethink diesels. Environmental pollution standards for diesel cars and light trucks are scheduled to be as strict as they are for gasoline vehicles. A modern diesel engine is as clean as a gas engine.

You may also have heard a lot in the news about bio-diesel. The exciting thing about diesels is that they’re not limited to fossil fuels. They can run on fuel made from vegetable oil. There are refineries that make diesel fuel from cellulosic waste like woodchips from lumber mills. There’s even this cool new process where a special strain of algae is used to convert carbon dioxide, water and sunshine into bio-diesel. That’s still a ways off, but you can see that diesel can become a sustainable source of fuel.

And, there are not a lot of trade off’s with diesel in terms of performance. A modern passenger car diesel is very smooth, quiet and quick. Most folks wouldn’t notice any difference. For those who tow trailers and haul heavy loads, diesels will be an improvement.

Now diesel engines are heavy duty, so they cost more than gas engines. But they get better fuel economy – so the break-even point is largely dependent on the difference between Iowa gas and diesel prices at the pump and how many miles you drive. And diesels have a higher resale value.

Now, let’s get back to diesel maintenance. You have to keep in mind that most of the new diesels are just coming in, or will be over the next couple of years, so we don’t have the maintenance schedules to make direct comparisons yet.

But going off what we already have in Iowa, we can expect fluid drain intervals to be similar to gasoline engines. Diesels do require very clean fuel, air and oil, so their filters are much higher capacity than gasoline filters and cost more. The engine air filter needs to be changed more frequently as well.

Repair costs are similar. As with gasoline engines, proper maintenance is the key to long engine life and to avoiding repairs. So pretty much what we have come to expect with gas vehicles; coolant system service, transmission service, power brakes, power steering, differential, filters, fuel system, and so on. And the payoff for you, if you’re the kind that likes to keep your vehicles for a long time, is that a properly maintained diesel engine can last for hundreds of thousands of miles.

Share

Posted in Fuel System | No Comments »

Nitrogen Fill For Tires in Pella Iowa

Thursday, June 10th, 2010

So, everyone in the Pella area knows how great helium is – you know, party balloons, squeaky voices. But a lot of people around Pella still haven’t heard about the benefits of nitrogen in your tires, and how it can help your tires. Here’s some great advice from AutoNetTV, brought to you by Pella Car Care.

Nitrogen has actually been around for a long time in the commercial sector, but it’s just starting to catch on for private vehicles.

Why nitrogen in your tires? Air is air, right? Actually, it turns out there is a difference.

Contact Pella Car Care to learn more about nitrogen in your tires
You can find us at:
90 Truman Road
Pella, Iowa 50219
Or call us at 641-628-9223

The heart of the matter is maintaining proper tire inflation. When your tires are properly inflated, they last longer, handle better and more safely, and save you money at the gas pump.

The problem is that tires filled with regular air can lose a pound and a half of air pressure every month. This just happens as the oxygen in the tire seeps out. So if you don’t check your pressure for a month or two, well, you can be significantly low – low enough to actually affect your handling, shorten tire life and waste money at the fuel pump.

How does nitrogen help? Regular air contains about 78% nitrogen. Nitrogen is the largest molecule in air. It’s dry and non-flammable. Air also contains 21% oxygen, which is smaller and seeps out of the tire three to four times faster than nitrogen.

So, a tire filled with nitrogen will take about six months to lose as much pressure as regular air does in just one month. So it’s more forgiving for those who don’t check their pressure every week.

Also, when oxygen is at higher temperatures – like those inside your tire when you’ve been driving for awhile – it oxidizes the inside of your tire. Getting the oxygen out of your tire means that it’ll last longer.

Who’s using nitrogen? Well, let’s start with NASCAR and Indy. These racers like nitrogen’s ability to maintain consistent tire pressure and reduce tire temperatures under very demanding conditions. The US government requires all commercial aircraft to have nitrogen in their tires. NASA and the US Military use nitrogen. The mining industry has been filling those “humongous” tires with nitrogen for years. And semi trucks and trailers are starting to use nitrogen extensively.

You may have heard some detractors of nitrogen. But the studies and white papers from tire and vehicle manufacturers demonstrate that the technology really works.

In fact, a prominent consumer research group did a study where they filled some tires with air and some with nitrogen and stacked them outside for a year. They observed that the nitrogen filled tires did hold their pressure better, but they couldn’t see the economic benefit. But that particular test has very little to do with the real world. Most tires are actually holding up cars and they also get driven around and do a lot of work. So if nitrogen helps them last longer, saves gas and gives safer handling, it’s worth considering.

Learn more about nitrogen in your tires by watching our attached auto tips video from AutoNetTV.

Share

Posted in Tires and Wheels | No Comments »

I Can See Clearly Now: Wiper Blade Replacement

Thursday, June 3rd, 2010

About 90% of our driving decisions are based solely on what we see. So having a good pair of windshield wipers is extremely important.

Everyone has experienced the frustration and fear of not being able to see clearly during a storm, or when our windshield is just dirty. In fact, it’s estimated that 46,000,000 motorists from Pella and across the nation are driving with wipers that can’t adequately clear their windshield in a storm.

It seems like your wiper blades are always at their worst when you need them the most. If that sounds like you, you’ve got plenty of company in the Pella area. 78% of drivers only change their wiper blades after the blades function so poorly that they become a safety hazard.

We need to change our thinking. Instead of blades being something to replace when they fail, we need to consider wiper blades as an important safety component. Then we’ll stay ahead of the storm.

You really ought to replace your wiper blades twice a year; in the spring and the fall. You may even want to get special winter blades in the fall.

Winter blades are designed to resist freezing. Speaking of winter and freezing conditions, if your car has been sitting for a long time and the windshield becomes frozen, don’t use your wipers to clear off snow and ice. That can just shred your blades and may even damage the wiper motor.

Your wiper blades live outside; freezing cold and blistering sun. Over time, they become hard and brittle, and then tear. They also lose their flexibility and just don’t clear the windshield effectively. Worn wiper blades aren’t just a safety hazard; they can also scratch your windshield. That may require replacing the entire windshield – a big cost for such a little part.

AutoNetTV recommends you replace worn blades right away. Your local service center can provide you with a quality replacement blade. They cost about the same as they would at the store – but installation is included at the service center.

Of course you also need washer fluid to help your blades do their work. Even though Pella Car Care will top off the washer fluid with a full service oil change, it is a good idea to have some extra fluid at home. It’s a good idea to keep a bottle in the car if you’re on a road trip.

Always use windshield washer fluid. Plain water, even that fancy French bottled water, just doesn’t cut it. It can freeze in the fluid reservoir or on the windshield itself, making things worse. Besides, water won’t do as good job of cleaning your windows.

So follow these tips to keep your windshield clear and your eye on the road.

Find us at:

Pella Car Care
90 Truman Road
Pella, Iowa 50219
641-628-9223

Share

Posted in Maintenance | No Comments »