Archive for September, 2010

Pella Customer Detective Work

Wednesday, September 29th, 2010

One might say the most challenging part of being an automotive service technician at Pella Car Care in Pella Iowa is diagnosing a problem before it can be fixed.

Cars are made up of a bunch of complex systems. There usually could be a number of reasons for any given symptom. So it’s challenging to track down the actual cause of the problem. And it can be frustrating for the vehicle owner because it can take time and money to get to the bottom of a problem. If it’s not something obvious, it’s easy for the customer to focus on the fixing and not the diagnosing.

Let us introduce you to something we’ll call Customer Detective Work – that is helping your Pella  technician find clues to what’s wrong.

We start with the detective basics: What, Where and When. Play along with me. You come in to Pella Car Care and your car is making a funny sound.

  • Q: Where’s the sound?
  • A: Around the right front wheel.

    •  

  • Q: What kind of sound?
  • A: Kind of a clunk, clunk sound.

    •  

  • Q: When do you hear the sound?
  • A: When I turn and accelerate.

    •  

  • Q: Right and left? Forwards and back?…

Do you see where we’re going? You’re gathering additional information to help your Pella technician know where to start. Based on your car and the tech’s experience, he’ll know where to look and can start with the obvious suspects.

You can see how that would be more helpful than dropping the car off with a note that says “making a funny noise”.

When you think you need to bring a vehicle in, make some notes about the problem. Rather than just saying “it’s leaking”, tell the tech the color of the fluid, and approximately where under the car you see the puddle.

Things like ‘the car is stalling or sputtering’ are often very hard to diagnose because they’re intermittent. They may not happen every time you drive and usually aren’t happening when you actually bring the car in. So, it is a big help for you to describe what’s happening in as much detail as possible.

Your technician at Pella Car Care will need to be able to duplicate the problem if possible so he needs to know details, like ‘it stalls after it’s been driven for about 20 minutes and I go over 50 miles an hour’.

If the tech can experience the problem personally, he’s better able to make a diagnosis and repair. And, then test to see if the repair solved the problem.

Share

Posted in Service Standards | No Comments »

Deep Clean Your Fuel System At Pella Car Care

Wednesday, September 22nd, 2010

Having trouble with your fuel system? Bring your SUV into Pella Car Care for a check up.
90 Truman Road
Pella, Iowa 50219
641-628-9223

Today we’re talking about fuel system cleaning. The first thing to know is how important it is to have a clean fuel system. You need fuel to go, and the cleaner your fuel system, the more efficiently the fuel will burn. That means more power and better fuel economy.

A clean fuel system saves money at the pump. We guess you could say, it all starts and ends at the pump. One of the most important things you can do to keep your fuel system clean is to buy good quality gas. Major brands have detergents that keep gum and varnish from rapidly building up in the fuel system.

So buying cheaper gas can actually cost you in the long run. Now, most cars on the road are more than five or six years old. That means they’ve had time for some dirt and rust to start accumulating in the fuel tank. This junk needs to be filtered out of the fuel before it hits your engine. That’s the fuel filter’s job.

When the fuel filter is clogged, the dirty fuel will bypass the filter and go on up to the engine where it can clog fuel injectors and get into the cylinders. That could do some damage. So you should have your fuel filter changed when recommended. Check your owner’s manual or ask your service advisor if your fuel filter is due for replacement.

The fuel then goes up into the throttle body. This is another area where varnish and gum can accumulate. A professional fuel system cleaning will use a combination of special cleaning chemicals and old fashioned swabbing to clean out the throttle body. Now, the fuel injectors are the last stop in the fuel delivery system.

It’s real important to keep those fuel injectors clean. The fuel injectors need to deliver a precise amount of fuel, at exactly the right time, in a particular spray pattern. They just can’t do that if they’re dirty. Dirty fuel injectors really rob power and waste fuel.

It is important for the fuel system proper, but there are a couple other things that will help keep your engine clean as well. Of course, air is mixed with the fuel before it’s burned. Dirty air means dirt gets into your engine, so you need to replace your engine air filter when it’s dirty.

The PCV value routes unburned fuel that escapes into the lower engine back up into the intake system to be burned. A sticky PCV valve needs to be replaced to make sure that system is working properly and the breather filter needs to be replaced if it’s dirty as well.

Do all these things and your engine’s air and fuel will be as clean as possible. You’ll get much better fuel economy and better power

.

Share

Posted in Fuel System | No Comments »

Stop It! You Need Good Brakes

Wednesday, September 15th, 2010

Good brakes are obviously very important. If you’ve ever had your brakes go out while you’re driving around the Pella area, you’ll know how terrifying it can be. Today we’ll focus on how to tell when you have a brake problem, and how to make good repair choices.

Often, the first indication that something’s wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.

Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It’s an early warning indicator.

When you hear that sound, schedule an appointment at Pella Car Care soon.

Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.

A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.

Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.

Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.

Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That’s OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you’ll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won’t last as long either. In our opinion, that’s a lot of compromise for just a few dollars in savings.

You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.

Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you’ve been driving with completely worn brake pads, you’ve scratched grooves into the rotors. If the grooves aren’t too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.

Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that’s thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.

Something that’s often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.

So here’s the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that’s right for you.

Share

Posted in Brakes | No Comments »

Finding Vehicle Recall Information From Pella

Wednesday, September 8th, 2010

No matter how well they’re made, cars are bound to have problems with their design or manufacturing. When the government thinks a problem is really serious, they require the manufacturer to issue a recall notice  and to fix the car free of charge. The manufacturer then tries to contact everyone who owns that type of car in Pella and elsewhere until the work is done.

If you have questions about vehicle recalls, give us a call:
Pella Car Care
90 Truman Road Pella, Iowa 50219
641-628-9223

These recalls always affect safety, so you need to take them seriously. It’s really easy to find out if a vehicle is being recalled. For links to government sites, look in the AutoNetTV website.

Other website include: carfax.com; autobytel.com; and dmv.org. All of these sites have free recall searches.

Recalls are pretty serious and don’t happen all that often. But sometimes cars have less serious problems that you still might want to know about. In this case, manufacturers issue what is known as a Technical Service Bulletin – or TSB. These bulletins tell service centers how to repair a problem that occurs frequently or is especially difficult.

The pros receive updated information through subscription plans, which are sometimes available in consumer versions too. You can buy access to these for an annual fee.

Whatever your source, pay attention to vehicle recalls to keep you and your passengers safe.

Share

Posted in Maintenance | No Comments »

On Board Diagnostics For Your SUV

Friday, September 3rd, 2010

Make an appointment with Pella Car Care to have your on board diagnostics analyzed.
90 Truman Road
Pella, Iowa 50219
641-628-9223

Today we’re going to talk about on-board diagnostics and the questions we hear from folks around Pella Iowa who need answers about diagnostic services. They want to know what diagnostics are, what’s involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Pella Iowa.

These are valid concerns. If you don’t understand something it’s really hard to know its value. Let’s start with some history.

Since 1996, all cars and light trucks have been required to use a standardized diagnostic system to help repair technicians determine what’s wrong with your vehicle. The diagnostic system works with the vehicle’s Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can’t adjust for, the computer will turn on the check engine light.

It is also called the ‘service engine soon’ light on some vehicles. The warning light signals you to get into your service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you’ve searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what’s wrong.

That’s a common myth. The code itself doesn’t tell you what’s broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won’t tell you what’s wrong or how to fix it.

Let’s say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You’ve confirmed a fever, but you don’t know what’s causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician’s examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads ‘Bank 1 sensor 1 circuit slow response’. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that’s all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that’s stored in the engine control computer. That history’s very helpful in diagnosing the problem. Service centers like Pella Car Care invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don’t need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at Pella Car Care. If the light burns steady – don’t panic. Get in to Pella Car Care soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.

Share

Posted in Service Standards | No Comments »

The Fallacy of Cheap Tires

Wednesday, September 1st, 2010

Do you ever shop for shoes in one of our Pella area shoe stores?
When buying a running shoe, is quality important?
Does durability matter as long as the shoes look fabulous?
Would you rather have one pair of long lasting shoes or two pair of lower quality shoes at the same price?

Is the warranty important when buying tires?

When you choose new tires in Pella, what’s the most important factor for you?

Give us a call at Pella Car Care at 641-628-9223 for tire recommendations.

You know, buying tires in Pella is a big deal. It’s a big ticket item so you know you’ll be spending a lot. You’re not only concerned about the price, but you want to know that it’ll be a long time before you need to buy new tires again.

And of course there’s the safety aspect as well. The tires do a lot of work – they carry the weight of the vehicle and you and your passengers. They need to be up to the task. You want to be sure they hold the road and provide good traction. If you carry heavy loads or tow a trailer, the tires need a high load rating to be up for the job.

As a tire professional, I think it’s important that people understand the effect of price on a tire’s performance and durability. When I was a kid, my dad had a saying. He said, “Pay twice as much and buy half as many”.

Dad applied that to a lot of things. He thought that one high quality suit would last longer and look better than two cheap suits. The saying really seems to hold true when it comes to shoes and boots, too.

I buy high-quality work shoes because I spend a lot of time on my feet. They’re more comfortable, have important safety features like steel toes and non-slip soles – and they last at least twice as long as cheap shoes. I feel I get very good value for my money.

I apply the same thinking to tires. The major tire brands that you’re familiar with are known as Tier 1 tires. These tires are well-engineered and very high quality. Comparable tires are usually in the same price range from brand to brand.

Stepping down in price you come to private label tires. Some large tire store chains carry tires with the chain’s own brand. It’s important to know that most private label tires are built by the same Tier 1 brands that you are familiar with – so they are a quality product. You can ask your tire professional who makes their private brand.

The lowest priced tires on the market are Tier 3 tires. These tend to be imported from China or South America. Since you get what you pay for, you can’t expect a Tier 3 tire to deliver the same performance and durability as the others.

So let’s say you need new tires. You’ve determined the features you need. So you have several options, including price options. Now, you’ve probably heard the term ‘it’s a 40 thousand mile tire’ or ‘it’s a 60 thousand mile tire’. Simply put, the manufacturer warrantees the tire for defects for ‘X’ number of miles. If that’s important to you, look for the warranty.

What’s the difference in the tires with higher mileage warranties? It’s the rubber compounds and the amount of tread material. As you might expect, you’ll pay more for the longer-lasting tire.

Now the cheapest tires you can find won’t have a manufacturer’s mileage warranty or if it does, it’ll be relatively low. That brings us back to dad’s saying; if you buy the cheapest Tier 3 tire you can, you will likely go through two sets in the time it would take to wear out one set of good quality tires. And the good tires won’t cost twice as much, so you’ll end up paying more per mile driven with the cheap tires.

Hey, I realize that sometimes the budget will only allow for a Tier 3 tire. I make them available for my customers who need them because I would rather see them driving with safe, new tires than pushing their old tires beyond their safety limits. But I always counsel my customers to buy as much tire as they can afford, because it will be much less expensive in the long run.

Your tires are the only part of your vehicle that touch the road. You’re only as safe as your tires are well built.

Buy value – not price.

Share

Posted in Tires and Wheels | No Comments »