Archive for April, 2011

Wiper Blades In Iowa

Wednesday, April 27th, 2011

If you’re gonna drive around the Pella area, you’ve got to be able to see! So having a good pair of windshield wipers is extremely important. We’ve all experienced the frustration and fear of not being able to see clearly during a storm, or when our windshield is just dirty.

It seems like your wiper blades are always at their worst when you need them the most. But windshield wipers are like most other vehicle parts– they require regular attention in order to work their best.

You really ought to replace your wiper blades twice a year; in the spring and the fall. If it’s going to be a particularly harsh winter in Pella, you may even want to get special winter blades in the fall. Winter blades are designed to resist freezing.

Speaking of winter and freezing conditions, if your car has been sitting for a long time and the windshield becomes frozen, don’t use your wipers to clear off snow and ice. That’ll just tear up the blades and cause them to wear out more quickly. It may even damage the wiper motor.

Over time, wiper blades become hard and brittle, and then tear. They also lose their flexibility and just don’t cover the windshield effectively.

Worn wiper blades aren’t just a safety hazard; they can also scratch your windshield. That may require replacing the entire windshield; a big cost for such a little part.

Replace worn blades right away. Your local service center can provide you with a quality replacement blade. They cost about the same as they would at the store; but installation is included at Pella Car Care.

Of course you also need washer fluid to help your blades do their work. Even though your local Pella service center will top off the washer fluid with a full service oil change, it is a good idea to have some extra fluid at home, or in the car if you are on a long trip.

Always use windshield washer fluid. Plain water, even that fancy bottled water, may freeze in the fluid reservoir or on the windshield itself, making things worse. Besides, water won’t do a good job of cleaning your windows.

And remember that some vehicles have two reservoirs: one for the windshield and one for the back window – which may be under the hood or somewhere in the back.

So follow these tips to keep your windshield clear and your eye on the road, and give us a call at Pella Car Care or come by our shop at 90 Truman Road, Pella, Iowa 50219. Call to make an appointment at 641-628-9223

.

Share

Buying the Right Tires and Wheels

Tuesday, April 19th, 2011

Everyone in Pella eventually replaces their tires, whether it’s because they’re worn out or they’re just looking for something different. There are so many great tire choices, it can be difficult to sort them out. Let’s group the broad spectrum into several categories that will help in the selection process.

One category is often referred to as “summer tires”. Summer tires are designed to be driven on the road when temperatures are generally above 45 degrees. Their tread design is optimized for traction on dry roads in Pella Iowa and they’re also able to effectively displace water on rainy roads.

Pella Selecting Tires and Wheels Now the rubber compound gets a little hard and stiff as temperatures drop below 45 degrees as it occasionally does here in Pella Iowa. And the tread which handles dry roads so well, can get packed with snow or mud – which provides very little traction in those conditions.

So if you live where its summer all year round, these tires will work well for you. If you like maximum performance in warm weather, but still live where it gets cold and snowy, you’ll want to change your summer tires for winter tires as the weather starts to change.

Summer tires can be purchased with an emphasis on handling performance, smooth ride or long life. Your tire professional at Pella Car Care can help you find the right tire for the way you drive.

As you can imagine, winter tires are designed to work very well in snow and ice. Their tread is designed with many channels and grooves that throw the snow out of the tread as the wheel turns. This means the tire is always be able to bite into the snow.

The rubber compound used in winter tires is specially formulated to be flexible at temperatures below 45 degrees. This maximizes cold weather traction. When it gets warmer, the softer rubber will wear faster on warm dry pavement than summer tires, so change them out once the weather has turned.

There’s a range of tires within the winter tire category. If you live where there’s a lot of snow and ice, look for the mountain and snowflake icon that signifies a severe snow rating. If you have milder winters and still want a performance component, they make a winter tire for you as well.

For many people, an all-season tire is the answer. You will give up some of the performance at the extreme ends of the summer tire/ winter tire spectrum, but you will find a long wearing tire that gives both good highway performance and winter traction on our Pella Iowa roads.

Within the all-season category, there are many choices that you tire advisor can help you evaluate.

Pella Car Care
90 Truman Road
Pella, Iowa 50219
641-628-9223

Outside of these three main categories, some people in Pella with trucks and SUVs like a tire that is designed for both on-highway and off-highway use. They can handle the rocks and bumps off-road, but still work well on the street. Again, many options depending on the relative emphasis on on-road verses off-road.

You may want new wheels to go with your new tires – well, there are hundreds and hundreds of styles to choose from. That’s a matter of personal taste. If you want to change the size of your wheels and tires, do get some professional help.

The computers on your vehicle are programmed to the size of wheel and tire combination that comes from the factory. Tire size affects various computer controlled functions like anti-lock brakes, traction and stability controls, speedometer and odometer. Of course, you want these systems to work properly. The computers can be re-programmed for different tire sizes.

And if you want to increase the size of your wheels and tires, you’ll want so help to make sure they’ll fit in the wheel wells of your vehicle without rubbing during turns or over bumps.

Share

Wheel Bearings

Friday, April 15th, 2011

Let me start by saying that your wheel bearings keep the wheels on your vehicle. Did that get your attention? In this article we’ll discuss more about wheel bearings and how you can keep them doing their very important job while you drive around Pella.

Wheel bearings are pretty simple parts. They’re made of high quality steel and are engineered to last 100,000 miles or more if properly cared for. The bearings do two very important jobs: First they allow the wheel to freely rotate with as little friction as possible. Second, they support the weight of the vehicle. For example, if your car weighs 3,600 pounds, each wheel has to support approximately 900 pounds. That’s a lot of heavy lifting over many, many thousands of miles.

Even though wheel bearings are relatively simple, they need to be in near perfect condition to do their job. The bearings are packed with heavy grease to lubricate and protect them. A seal keeps the grease in and water and dirt out. It’s when the seal starts to leak that problems begin. The grease can become contaminated; causing the wheel bearings to overheat and ultimately fail.

The first sign that your wheel bearings are in trouble is an unusual noise coming from a wheel. It could be a chirping, growling, rumbling or a cyclic sound. The noise could get louder or even disappear at certain speeds. Your technician at Pella Car Care can inspect for bearing wear by lifting the vehicle and checking for play in the wheel.

Now some wheel bearing assemblies are factory sealed. That means that they cannot be serviced – they can only be replaced. Those that aren’t sealed can be serviced on schedule. The bearings are removed, cleaned and inspected. If the bearings are still good, they’re re-installed – if not, they’re replaced. They are then packed in grease and a new seal is installed.

If your vehicle has a factory sealed wheel bearing assembly, the entire assembly needs to be replaced when trouble arises. Unfortunately, the parts are pretty pricy – but they usually last a long time as long as the seals hold up.

Now, even a good seal cannot keep out water that’s exerting pressure on the seal. So if you’ve driven through hub deep water your bearings should be cleaned and repacked if they’re serviceable. If you have factory sealed bearings, you just need to watch for signs of premature failure.

If your wheel bearings can be serviced, your owner’s manual will recommend an interval, usually around 30,000 miles.

Now, if you have any sort of trailer, don’t forget its wheel bearings. They probably need to be serviced even more frequently. This is especially true for boat trailers that are used to launch the boat by backing it into the water. These should be serviced every year, usually at the end of the season so that the bearings don’t have the opportunity to sit and rust all winter.

So what happens if wheel bearings fail? Well, the wheel can literally fall off the vehicle. I don’t need to tell you how bad that could be. So check with your service advisor at Pella Car Care and see if your vehicle’s wheel bearings can be serviced and when it’s recommended. Listen for warning signs. If you’ve been fording streams or puddle surfing after rainstorms, be especially vigilant.

Come by Pella Car Care for a wheel bearing inspection, or for Diagnostics. Call for an appointment at 641-628-9223

Share

Get Where You’re Going With Power Steering Service

Thursday, April 7th, 2011

Today we’re going to talk about power steering service. If you took an informal poll around Pella you’d probably find that most have never heard of power steering service. That’s not surprising. Even though power steering is standard on every vehicle, most people in Pella aren’t aware that it needs periodic service.

If you’re younger than a certain age, you’ve probably never driven a car or truck without power steering. To get an idea of the difference; if you’ve ever cut a board with a hand saw, you know it’s a lot of work. Using a power saw is easy-peasy by comparison.

Without power steering, your arms have to do all the work to steer the wheels, and that’s hard, especially around downtown Pella. That’s why old cars had such big steering wheels; to get enough leverage to steer.

Steering Most vehicles have a hydraulic power steering system. The serpentine belt from the engine powers a pump. The pump pressurizes the power steering fluid. This actuates a hydraulic cylinder that provides power to help steer.

Some vehicles use an electric pump to pressurize the fluid rather than a belt driven pump. We’re also seeing vehicles with electric motors providing the power assist, not using power steering fluid at all. We’ll see a lot more electric systems as more hybrids and electric vehicles hit the market.

At least for now, the vast majority of power steering systems use power steering fluid that needs to be serviced. The fluid needs to be changed for a couple of reasons. For one, it attracts moisture. Water has different hydraulic qualities than power steering fluid, and that makes a difference in steering performance. Water is also corrosive and can damage power steering components. The fluid also just gets dirty and needs to be changed. Removing the old fluid and flushing out the system gets rid of dirt and deposits. The clean, fresh fluid lubricates and provides better corrosion protection.

So ask your service advisor at Pella Car Care or check your owner’s manual to see when power steering service is recommended. It’ll extend the life of your power steering components.

Share